If you would want to list your subnet on our IP Address Market you need to set an abuse contact to your IP subnet.

This article is focused on how to assign an abuse contact on APNIC.

This is one of the requirements in order to list your subnets on the IP Address Market.

STEP 1. Login to APNIC portal https://login.apnic.net/

STEP 2. Navigate to “Resources” then “Whois Updated” on the right side.

STEP 3. Click on "Update" tab and select inetnum in the Object type droplist.

STEP 4. Search for the IP range that you wish to set abuse contact. For example: 103.141.68.0 - 103.141.68.255

Note: If you are changing the abuse contact information for the "specific subnet", don't forget to check the sub-assignments

STEP 5. Edit the mnt-irt field to IRT-DIGITAL-AP.


STEP 6. Click the Update button at the bottom.

Did this answer your question?