STEP 1. Access Terminal -> IP Address Market -> IPAM and click on BYOIP button.
STEP 2. Choose between two manual approval options.
ROA - by choosing this option, the system will check Route Origin Authorisation of your IP range. ROA should be created beforehand for our ASN 61317.
MA - if manual approval is chosen, the system will send you an email to your abuse-c email. Make sure that your abuse contact is valid because you will need to manually verify the BYOIP process.
Keep in mind that if you have multiple abuse contacts set, you will receive a letter to each one of them, however, only one must be approved.
STEP 3. After validating your IP addresses to be used in our infrastructure, select 'Confirm' to finish up the process.
You will now be able to see your subnet in Terminal -> IP AddressMarket -> IPAM